Activity Stream

The Maccari is a good investment. The small spring that puts pressure on the trigger and locates on a tab on the stamped steel safety slider unit...

Basically he put a car tyre pump ontop of the valve spout sealed it airtight with an oring and pressurised the can enough untill it popped the dent...

Does that mean with a tinbum short-stroke extension they are doddle-plus?

Go with your calibre of preference John.:)

Alan and Graham! What a great pair and fond memories. MAG was my favourite shop which I have been going to since it opened. My first proper airgun,...

I think I read it right, but didn't answer my question :confused: Might be me being uncle billy ;)

Thanks Paul.

One thing that might be a factor in your choice is just how easy a mk3 full length in 177 is to cock, they are a doddle.

Couple of posts down ;) https://www.airgunbbs.com/showthread.php?920645-Using-car-tire-pump-to-restore-a-old-Webley-Oil-Tin

Evening John Yeah 3 is a odd number :oldwink:. I would say 177, but I reckon you prefer the 22 cal ?. Either cal would be nice. And the scope...

Set it to 58 mm as a rough start and got the correct levels of power, now shooting at a nice steady 11.4Ft/ld with JSB pellets. it actually needed...

I replaced the plastic one on my MK1 with a Maccari a few years ago and it is a lot better (it was quite expensive as I got hammered for import tax)....

Out of curiosity, and assuming this is the tin in the previous thread, how did you blow the dents out, I thought they were sealed for life?

Maccari/ARH makes a replacement trigger from time to time that is supposed to be a good upgrade.

Evening Les, I own two .22's including the SR and a Mk.2 HC plus one .177 HC. I do have a caliber preference but I'll not divulge it just now.

Color of paper doesn’t look right? See one in gallery and mine paper not tan but a bit golden?

You are dedicated, thats for sure! Will be interesting to hear how the FX liner performs in a springer!

I am in tune with you ! And yes, we too have the occasional Jay visiting but I give them a wide berth.

What cal is your TX200 SR ?, and do you fancy a change in cal. I have a mk3 Tx200 full length in 177 and a mk1 in 22 and both are great performers....

This one sold for £180 earlier this month on here https://www.airgunbbs.com/showthread.php?920211-Genuine-Webley-oil-can-from-1930s

Dominated by magpies and crows who constantly dig out clumps of grass from the lawn, the songbird has become a rarity over the years.

Well I went to Lidl and Aldi to get some Pauliner Octoberfest beer. Such was my disappointment I ended up with some Tuborg Fici from lidl. Its...

Honestly, I would be OK with either, as a left handed shooter with a restricted choice, they appear to be fine with me. Weihrauch's approach to...